Levelone KVM-0410 Uživatelský manuál stáhnout pdf (Strana 12)

LevelOne

plus 8 more computers directly connect to the Master (to "PC A"~”PC

H”), see figure 13.

Figure 13: All 16-port KVM Switches in cascade

For OSD menu:

After connection completes, you should re-activate

the OSD menu to check if the Master recognizes the

Slaves. A triangle mark (!) is placed to the right

of the channel name indicating the port is connected

to a Slave not a computer. A number to the left of

the triangle mark indicates the Slave model, i.e. 8!

for an 8-port Switch.

Change Configuration while Running

A device (a computer or a KVM Switch) at any 'PC x' port can be

changed at any time after initial power-up. If you change any one of

the “PC 1” to “PC 8” ports connection from a computer to a Slave

KVM switch or vice versa, or replace the devices of a port; the OSD

LevelOne

will update this change the next time it is activated.

Note: Any new device must be turned off before it is connected to the

Master.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Žádné komentáře

Levelone KVM-0410 Uživatelský manuál Strana 12